Water getting into your smartphone’s charging port is not an uncommon occurrence. You may be cooking, exercising, or perhaps even showering, and if your phone is close, there’s always a risk. So, what would you be doing if you discovered water in your USB port? You might be thinking about how to get water out of charging port?
Many ways to eliminate water from such a charging port are floating around the internet. Some of which can potentially destroy the device. On the other hand, this approach is the safest way to remove water from the charging port, as advised by Apple and Samsung.
How To Know If Your Charging Port Has Water In It?
Moisture sensing gets included in the most recent Samsung and Apple iPhones. It detects and warns you when water gets detected in your phone’s charging port. However, if you do not have the most recent models, your phone will not charge when there is water inside the charging port unless you remove the water.
When a charger gets connected to a wet device, Apple devices will show “Charging not available: Water has got detected inside the Lightning connection.” “Disconnect cable: Moisture has been detected,” says the notification for Android smartphones.
First Aid For Rescuing Your Smartphone From Water – Quick Response
Don’t panic if you dropped your smartphone in water or got the port wet in any other way. There are some easy solutions to save the phone from significant harm. Follow these instructions carefully:
- Switch off your phone right away.
- Remove any extraneous items, such as headphone wires, adapters, or perhaps even the phone cover.
- Turn your phone upright so that gravity can keep the water from getting any further inside.
This Is The Best Method On How To Prevent Mold After Water Damage.
How To Get Water Out Of Charging Port? – General Methods
So how to get water out of charging port? To pull the water out of your phone’s charging port without causing severe harm to the phone. It would be helpful if you switched off your phone. Then, dry your phone’s charging port and remove most water using a delicate and thin towel. You may also utilize alternative methods, like as placing your phone in direct sunlight.
Please do not switch on the charging port immediately after drying it. Please wait for at least a half-hour or more to allow it to thoroughly dry before putting it in a location with excellent ventilation and a warm temperature. As a result, even the smallest amount of moisture can evaporate.
There are various techniques for drying out your phone’s charging port. Unfortunately, this can be a dangerous activity, so pay close attention when following the instructions.
Unless you want to hasten up the drying process of your phone’s USB port, place this in front of a fan or perhaps even near an open window if it’s not raining. However, you must avoid using heaters in general.
The reason since they might raise the temperature of your phone to a dangerous level, melt the outside, or create other heat-related difficulties. If you may not have a fan and aren’t comfortable leaving your phone near the window, you may always leave it to dry for the next few hours, ideally in a dry, warm place such as an airing closet.
It’s a truth that rice aids phones dry rapidly and is another answer to getting water out of charging port. It’s certainly something we believe can work for your charging port. If you’ve already tried wool and your phone is still flashing you the moisture alert message, try putting it in dry rice overnight.
It is always effective. On the other hand, a moist USB port isn’t always a serious problem, and it can frequently get remedied by putting your phone out to dry. Or set it in front of a fan. However, if your phone’s humidity warning sign takes a while to disappear, in that case, a rice approach is always a dependable option on short notice.
Since you have an Android smartphone, you may absorb the water from the charging port using a cotton ball or a toothpick. Because these substances are soft to the touch, they are suitable for small areas, and they are less likely to harm the Android charging port.
Do not use a toothpick or a cotton ball to clean your iPhone. Because the iPhone has a fragile charging port that extraneous particles can quickly damage. Instead, you may use Silica gel, which would be an excellent moisture absorber.
You’ve undoubtedly seen these gel packets inside of the bags or shoeboxes you buy. So, if you have any Silica gel on hand, cover your iPhone with it and leave it for a day or two, and it will drain all of the moisture in your iPhone’s charging port.
If we were thinking about draining water from a phone charging port, most would start blowing the water out of the port. Trying to blow into the smartphone charging port, on the other hand, frequently pushes the water deeper within the charging port, making it much harder to dry.
If none of the following alternatives works and you suspect the charging port is defective, you can contact customer support. Users may visit their Support page or go to their walk-in service facility for Samsung users. If you have an iPhone, they can contact Apple Support.
Finally, most mobile phone vendors advertise that their device is water-resistant. However, no firm offers a warranty for fixing a phone damaged by water. Even if your phone is water-resistant, avoid getting it wet. It’s a better preventive precaution than figuring out how to drain water from a charging port afterward.
Watch this video,
Video Credits – Fixed by Chaq
Download This Article : How To Get Water Out Of Charging Port